Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Tempe, AZ
Gate access control repair in Tempe typically runs $280-$650 for keypad or card-reader issues, with most calls completed same day. We’re Vance Gate Repair, and we dispatch to Tempe from our Phoenix office with technicians who carry replacement keypads, loop detectors, and control boards for the nine automation brands we service. Call (602) 483-6270 for a free estimate - your written price arrives before any work starts, under Haven Standard Clause 1.
Why Tempe Homes Are Different
Tempe’s housing landscape splits sharply. South of US-60, the 1980s-1990s master-planned HOA communities - Pheasant Ridge, Raintree, and the McClintock corridor - were built fast as the city pushed toward Chandler, and their original Linear and LiftMaster operators are now failing in waves. The block-wall perimeters and wrought-iron swing gates were never designed for 30-plus years of UV exposure at this latitude.
North and west of campus, the ASU rental belt along University Drive, Apache Boulevard, and Rural Road is a different world. High-turnover apartment complexes with automated vehicle and pedestrian gates see extreme abuse: moving trucks shear keypad posts, students prop gates open until motors burn out, and the August move-in surge reliably spikes our call volume. The light-rail corridor adds another stressor - constant pedestrian traffic cutting through vehicle gates causes “gate held open” alarm fatigue and premature clutch wear we rarely see in Chandler or Gilbert.
Tempe’s July-September haboob season drives fine Sonoran Desert particulate into operator housings and control boards, corroding circuit boards and seizing slide-gate track rollers. Year-round UV degrades photocell housings and rubber loop-detector leads faster than almost any other major US metro.
Our Main Tempe Services
These are the three services Tempe homeowners and property managers call us about most.
Gate Repair in Tempe
We repair swing gates off hinges, slide gates with seized rollers, and operator arms with stripped gears - common issues in South Tempe’s aging HOA communities and the campus rental belt. Every repair includes a written price before work starts and a photo log of what we found and fixed. Gate Repair in Tempe
Gate Installation in Tempe
New gate installation in Tempe means measuring for block-wall perimeters in master-planned communities or retrofitting access control at older apartment complexes near campus. We deliver a written scope and price before ordering materials, and we handle the power run and safety edges. Gate Installation in Tempe
Gate Motor & Opener in Tempe
Motor replacement is surging in South Tempe as original 1990s operators reach end of life. We service nine brands - Linear, Viking, Ghost Controls, DoorKing, and five others - so we repair what’s on your property rather than steering you toward replacement. Gate Motor & Opener in Tempe
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterGate Access Control in Tempe
Access control in Tempe means managing entry for two very different populations: long-term homeowners in South Tempe’s aging HOA communities, and transient renters in the ASU corridor’s high-turnover apartment complexes. The former need reliable keypads and remotes for original operators now failing after 30 years; the latter need durable systems that survive moving trucks, propped-open gates, and constant pedestrian traffic along the light-rail corridor. We carry replacement keypads, card readers, loop detectors, and control boards for all nine brands we service, and every Gate Access Control job leaves you with a written record of codes set, devices programmed, and photos of the installation.
Keypad Entry
Signs you need it
The keypad doesn’t respond to code entry, buttons are cracked from UV exposure, or the housing is damaged from vehicle impact.
What it costs in Tempe
Keypad replacement or repair typically runs $280-$480, depending on whether the control board and wiring are intact.
How we do it
We test voltage at the keypad terminal, replace the unit if the membrane or processor has failed, program new codes, and photograph the wiring diagram left in your job record.
Phone Entry
Signs you need it
Callers can’t buzz guests through, the speaker is distorted from dust infiltration, or the directory memory has lost programmed numbers.
What it costs in Tempe
Phone entry system repair or replacement ranges from $450-$850 for cellular-based units, with cellular plan fees separate.
How we do it
We verify dial tone or cellular signal at the entry panel, replace the speaker or processor if failed, reprogram directory numbers, and test call-through with you on site.
What Gate Access Control Costs in Tempe
| Item | Typical range in Tempe |
|---|---|
| Keypad entry repair/replacement | $280 - $480 |
| Phone entry system (cellular) | $450 - $850 |
| Remote control programming (additional) | $85 - $150 |
How long does keypad installation take in Tempe?
Most keypad replacements take 1-2 hours, including wiring verification and code programming. Apartment complexes near ASU with multiple entry points may need half a day. Call (602) 483-6270 for an exact quote - estimates are free.
Can you program remotes for my existing LiftMaster system?
Yes, we program remotes and keypads for LiftMaster, Linear, Viking, and all other brands we service. We record serial numbers and frequencies in your job file so future technicians have the data. Call (602) 483-6270 for an exact quote - estimates are free.
Gate Parts & Welding in Tempe
Welding and parts replacement in Tempe is shaped by two forces: the UV and monsoon degradation of South Tempe’s original 1990s installations, and the physical abuse of gates in the ASU rental corridor. Hinge pins seize in sagging wrought-iron swing gates; slide-gate rollers flat-spot from grit infiltration during haboob season; and moving trucks regularly bend posts or shear hinges near campus. We fabricate replacement parts on-site when possible and weld with processes rated for desert exposure, leaving a photo record of every repair under Haven Standard Clause 4.
Hinge Replacement
Signs you need it
The gate sags, binds at the latch, or the hinge pin has visible play or rust streaks.
What it costs in Tempe
Hinge replacement runs $180-$340 for standard residential gates, with heavy-duty or custom-fabricated hinges at the higher end.
How we do it
We support the gate with a temporary brace, cut out the failed hinge, weld or bolt in the replacement, adjust swing geometry, and photograph the finished alignment.
Gate Rollers
Signs you need it
The slide gate jerks, stalls, or the rollers have flat spots, cracks, or no longer sit square in the track.
What it costs in Tempe
Roller replacement typically costs $220-$420, depending on wheel size and whether the axle bracket is also damaged.
How we do it
We release gate tension, remove the failed roller assembly, install sealed bearings rated for desert grit, adjust track alignment, and log part numbers in your record.
What Gate Parts & Welding Costs in Tempe
| Item | Typical range in Tempe |
|---|---|
| Hinge replacement | $180 - $340 |
| Gate roller replacement | $220 - $420 |
| Post straightening or replacement | $350 - $750 |
Can you weld aluminum gates in Tempe?
Yes, we weld aluminum, steel, and wrought iron with processes matched to the metal and desert exposure. We grind, prime, and photograph every weld before leaving. Call (602) 483-6270 for an exact quote - estimates are free.
Do you stock rollers for older Linear slide gates?
We carry rollers and brackets for Linear and other major brands, and we can fabricate custom axles if the original bracket is obsolete. Part numbers are logged in your job record. Call (602) 483-6270 for an exact quote - estimates are free.
Brands We Service in Tempe
We repair and maintain nine automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our trucks stock common control boards, keypads, and safety devices for Linear, Viking, Ghost Controls, and DoorKing, with most Tempe repairs completed without a parts order. See our brands for full coverage details.
Pricing for Gate Repair in Tempe, AZ
| Service | Typical range in Tempe |
|---|---|
| Keypad entry repair/replacement | $280 - $480 |
| Phone entry system (cellular) | $450 - $850 |
| Remote control programming | $85 - $150 |
| Hinge replacement | $180 - $340 |
| Gate roller replacement | $220 - $420 |
| Post straightening or replacement | $350 - $750 |
| Control board replacement | $380 - $680 |
| Safety sensor repair/replacement | $150 - $280 |
| Loop detector repair | $200 - $380 |
| General diagnostic/service call | $120 - $180 |
In Tempe, prices push higher when haboob damage has corroded multiple components simultaneously, or when ASU-area apartment gates need after-hours service during move-in surges. Your written price is set before work starts - no surprise invoice, no “call for a quote.”
Neighborhoods We Serve in Tempe
We dispatch to all Tempe neighborhoods from our Phoenix office, with most calls reached within 45 minutes during business hours.
- South Tempe (Raintree, Pheasant Ridge, McClintock corridor)
- Downtown Tempe and the Mill Avenue district
- ASU corridor (University Drive, Apache Boulevard, Rural Road)
- North Tempe and the Papago Buttes area
- Tempe Town Lake and the Rio Salado corridor
Service Area - Cities Near Tempe
We serve Scottsdale, AZ to the north, Phoenix, AZ to the west and northwest, Paradise Valley, AZ to the northeast, and Glendale, AZ to the northwest. Dispatch and scheduling are coordinated from our Phoenix office; crews serve all metro-area cities locally with the same written-price and photo-documentation standards.
Serving Tempe, AZ - Our Local Coverage Area
We’re based in the Tempe area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Tempe
We answer live 24/7 and typically dispatch same day for stuck-open gates, with most Tempe calls reached within 45 minutes during business hours. Emergency after-hours rates apply for calls between 8 PM and 6 AM.
Most South Tempe HOAs require architectural review for new gate installations but not for like-kind motor replacements. We provide written specifications and photos for your HOA packet at no charge if needed.
Yes, we add temporary crew capacity every August for the ASU move-in surge. We recommend scheduling preventive maintenance in June or July to avoid emergency calls when trucks are actively damaging gates.
Call (602) 483-6270 for a free estimate. Your written price before any work starts, a photo record of every visit, and the 365-Day Done Right Promise on all completed work.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tempe Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.